How to Safely Transport Heavy Equipment on a Lowboy Trailer

Before you load heavy equipment on a lowboy trailer, read this article about proper placement and loading procedures. You’ll also learn about Tie-down systems and common cargo control devices. Loading and unloading heavy equipment on level ground is especially important. Always be sure to have someone in the cab with you to provide assistance or observe the loading process. Keeping these guidelines in mind will help you load and unload your trailer safely.

Tie-down systems

The amount of tie-down systems required for a Lowboy trailer depends on the type of cargo and the trailer’s structure. If the trailer has a headerboard or bulkhead, an additional tie-down must be used to counteract the forward force of the load when the truck driver brakes. This additional tie-down is known as a penalty tie-down.

The first step in properly securing the load is to secure the vehicle and accessory equipment with the help of the tie-downs. The load should be secured by four tie-downs that are of adequate strength and with sufficient length. These tie-downs must be secured at a 45-degree angle to the trailer’s special mounting points. The excess binding chain should be wrapped around the load binder and secured with a zip tie.

If possible, have a spotter in the cab while loading heavy equipment. Always ensure the safety of other drivers and passengers while loading the trailer. Always remember to wear proper protective gear and to always choose a stable and level base. This will decrease the likelihood of the equipment falling off or sinking under the weight. Before loading heavy equipment, check its manual to ensure that you have the right balance of weight. If possible, always distribute the weight of the equipment towards the front of the trailer.

Ideally, tie-down systems should be used for all articles that will be transported on a Lowboy trailer. Those with wheels must also be secured with cradles or chains. The drivers should also check the tire pressure of their equipment before traveling. If the tires are low, the tie-down systems may not hold as securely. Drivers may consider installing friction devices to provide better traction and prevent sliding. It is also important to keep in mind that the vehicle should be equipped with a parking brake to avoid accidents and other damages.

Air ride suspension

When it comes to lowboy trailers, choosing the right air ride suspension is crucial. Air-ride suspensions are known for their superior cargo protection. They also offer better ride quality than spring suspensions. Here’s how to choose between spring and air-ride suspensions. In this article, we’ll examine the differences between spring and air-ride suspensions, and how these options can help you transport your heavy equipment.

Lowboy trailers come in two basic types. Which one is right for you depends on a few factors, including the weight of your load, how long you’ll be hauling it, and the style of attachment. Ordinary lowboy trailers are flatbed trailers with only one drop. They’re unable to haul high cargo, but they can be cheaper than other heavy-duty trailers. Similarly, air-ride trailers come with a variety of options, including front and rear suspension systems.

An air-ride suspension allows the driver to choose the right ride height based on his or her comfort level. It provides the rider with more comfort and better handling than spring-ride trailers, making it much easier for you to transport your equipment. You should also check the tires’ tread depth to ensure they are suitable for the load on your trailer. Ensure the tires are the correct size and are not unevenly worn, as this may be caused by axle misalignment. Lastly, check the leaf springs and rims of your trailer for damage, which may be a result of overloading or poor road conditions.

If you want to transport heavy equipment on a lowboy trailer, consider purchasing one with air ride suspension. This suspension system is more effective than conventional suspensions, and is also designed to minimize vibration and shock. Air ride suspensions also last longer. The only downside to an air ride suspension is that it can’t support the weight of heavy equipment. So, choosing the right one is important!

Common cargo control devices

There are several safety measures that you should take when you are hauling heavy equipment with a lowboy trailer. While securing equipment with a lowboy, you should also consider the working load limit of your cargo. In general, these devices should be rated to support half of the total weight of the cargo. Some manufacturers include hook spots to secure accessories. Check your regulations to see if you need to install additional tie downs.

While loading heavy equipment, always be aware of the position of the ramp. It must be clean and lined up methodically with the trailer bed to avoid repositioning the ramp. Never unload machinery while it is still running. Always be sure to have a spotter or a second person on the scene to direct you as you load it. By following these safety tips, your transport will go smoothly and safely.

Proper cargo securement is important to avoid any damages to the equipment or the trailer. Securement devices must be tight and complementary to the weight and size of the cargo. Proper securement is crucial because vehicle accidents caused by heavy trucks are on the rise. Follow these safety measures to avoid these accidents. You can download the required documents in the following link. If you have any questions, feel free to contact us. Our customer service staff will be glad to help you.

Aside from using tiedowns, you must also make sure your load is rated for the type of tie-downs you are using. Your load should weigh no more than 50% of the total weight of your cargo. If your cargo weighs more than 10,000 lbs., you should use four anchor-type tie-downs on the trailer. Using the wrong type of tiedowns could lead to damage to the cargo and the trailer.

Loading and unloading on level ground

A lowboy trailer’s deck is lower than its surrounding unit and can be loaded either from the front or from underneath. Most lowboy trailers are equipped with hydraulic rams, which lift the trailer back to meet the unit after loading. Lowboy trailers are typically towed behind a semi-truck and have air brakes installed to prevent rollback.

There are two main types of tires for lowboy trailers: tube tires and tubeless tires. Choose the type of tire that best suits your needs and the terrain in which you plan to use your trailer. Tube tires are more stable on rough surfaces, have a higher weight capacity, and are inexpensive to maintain. But tube tires are more likely to blow out when punctured, and have a shorter service life.

Before loading and unloading heavy equipment on a lowboy trailer, you must always make sure that the load is securely secured. Improper loading can cause the truck to jackknife, which can be dangerous. Aside from the load, drivers of lowboy trailers must be careful to check parking and regular brakes, as any brake failure can have disastrous consequences.

When loading and unloading heavy equipment on a lowboy trailer, make sure to keep the load at a low, level height to reduce the risk of a rollover accident. While these trailers are more expensive than step-deck trailers, the use cases are completely different. Lowboy trailers are used for hauling heavy equipment and machinery. And they are also much more versatile than step-deck trailers.

Tube tires vs. tubeless tires

When choosing between tube tires and tireless tires for a lowboy trailer, keep in mind the purpose and intended use of the vehicle. Tube tires are more stable and can support heavy loads and are easy to repair, whereas tubeless tires are more difficult to repair and can blow out if punctured. They also tend to have shorter service lives than tube tires.

To make sure that your trailer’s tires are safe to ride on, check to see whether the manufacturer includes an anti-sway bar. While it might be tempting to cut the tire rims and leave them exposed to reduce trailer height, exposing them may result in damage. Moreover, exposed tires can loosen joints and cause the trailer to skid.

Despite their low weight, tubeless tyres are deemed safer than their tube-type counterparts. While tube-type tires can cause a puncture, they can easily be repaired by plugging the leak. They also run cooler and tend to be easier to balance than tube-type tires. But if you’re unsure of which to choose, it’s best to test both options to decide which is best for your needs.

When choosing the right tire type for your lowboy trailer, keep in mind the type of cargo you’ll be hauling, the intended use of the lowboy trailer, and the possible issues you might encounter down the road. Also, consider the cost of regular maintenance. Finally, consider the features of the prospective trailer before buying one. You’ll be happy with your decision.

Categorised in: Heavy Equipment, Safe Transport

This post was written by admin